Selling Standing Flexible 10 Ton Fixed Column Type Jib Cranes Crane
Price
Product presentation
Fixed column rotary jib crane (also known as fixed column
cantilever crane, column cantilever crane) can complete the most
difficult overhead lifting task, can undertake the frequent
overhead material transport work;
The fixed column rotary arm crane is composed of column, rotary arm
rotary driving device and electric hoist. The lower end of the
column is fixed on the concrete foundation by anchor bolts.
The cycloidal needle wheel reducer drives the rotary arm to
rotate.Crane jib for hollow section steel structure, light dead
weight, span, lift weight, economical and durable.
The fixed column rotary crane provides good working coverage in the
circular working area and supports tool balancer, pneumatic
balancer, vacuum lifting tool and hoist.
Fixed column rotary crane is steel, lifting weight up to 10 tons,
arm length up to 6 meters, can achieve 360° rotary lifting
operation;
The ground installation method will not exert pressure on the roof
structure of the building. The prefabricated standard modular
design structure can be easily expanded with the expansion of the
work unit center.
Advantages:
1. Special design, support frame design.
The design can preinstall the support frame component on the
cantilever component, effectively reduce the requirement of
installation space, greatly improve the hoist height;
Relative to KBK orbit spiral arm structure, support frame structure
can increase the stability of equipment operation, reduce
cantilever deflection and load vibration, create a safer operating
environment, reduce the workpiece damage rate.
2. Easy to operate.
Convenient for operators to accurately locate the load, easy and
efficient;
The top shaft is equipped with precision tapered roller bearings
and roller components for longer service life, providing guarantee
for smooth operation;
The base plate triangular support Angle plate minimizes crane
deflection and makes it easier to operate when accurately
positioning the load.
Cantilever crane composition:
The cantilever crane is mainly composed of mechanical, electrical
and metal structures.
1.1 Mechanical part
It is composed of main lifting mechanism, sub-lifting mechanism
(above 15T), small car running mechanism and big car running
mechanism.
Includes: motor, coupling, transmission shaft, brake, reducer, drum
and wheel, etc.
1.2 Metal structure
It is mainly composed of bridge frame (main beam, end beam,
railing, beginning, small array track), driver's cab and trolley
frame.
1.3 Electrical part
Electrical equipment and electrical wiring, including bridge Diao
power plant and institutions starting, speed control, reversing,
brake and stop the control system.
Technical parameters
| BZD Type | BZD0.25T | BZD0.5T | BZD1T | BZD2T | BZD3T | BZD5T |
| Lifting Capacity (T) | 0.25 | 0.5 | 1 | 2 | 3 | 5 |
| Maximum radius of rotation Rmax(mm) | 4500 | 4500 | 4500 | 4000 | 4000 | 4000 |
| Minimum radius of rotation R/min(mm) | 800 (manual operation)
1050 (motor-driven) | 900 (manual operation)
1200(motor-driven) | 1140 (manual operation)
1350(motor-driven) | 1380(motor-driven) | 1400(motor-driven) |
|
| Lifting height h(mm) | Generally 3000 |
| Total height H(mm) | 4180 | 4200 | 4280 | 4700 | 4950 | 5150 |
| Arm Length L(mm) | 4950 | 4950 | 5000 | 4570 | 4600 | 4650 |
| Lifting speed(m/min) | 7.1 | 6.8/2.3 | 6.9/2.3 | 6.8/2.3 | 8/0.8 | 8/0.8 |
| Horizontal speed (m/min) | General speed 20/low speed1~10 variable frequency |
| Rotation angle | 180°,270°,360° |
| Voltage | 220~460V 50/60HZ 3PH |
Application:
Modern industry Production line, Assembly line of machining,
Automobile industry, shipbuilding and Material lifting and
warehouse, wharf, Laboratory.
It`s an optimal lifting equipment for enterprise to improve work
efficiency and working conditions.
1. The capacity: _____ton.
2. The lifting height: ____m.
3. The arm length: ___m.
4. The power supply: ____P____V____Hz.
5. The working condition?
6. The crane, informs the for?
Installation:
The independent support frame components are separated from the
cantilever during installation, which is easy to install.
Embedded bearing assemblies greatly reduce the additional clearance
required for installation;
The bolt fastening between the support frame components and the
spiral arm enables the installation work to be carried out
separately.
The spiral arm can be installed on the roof of the workshop or
under the top barrier very close to, which minimizes the occupancy
of the top space and increases the hoist lift.
Hoist trolley running stop bolt fastening, can be installed
according to the position of the application change;
Top fully sealed bottom inlet collector assembly can be
pre-installed or later installed.It can supply power to the hoist
under the application environment of 360° rotation.
Packaging and shipping
