BMH Model Semi Single Girder Gantry Crane 17 Ton Box Type Easy
Installation
Product presentation of Semi Single girder gantry crane
The single girder semi gantry crane is a general purpose light
crane used in workshop or outdoors. Semi Gantry Crane can be
divided into Three types, single girder semi gantry crane, double
girder truss type semi gantry crane, and double girder box-type
semi gantry crane. This kind of crane is composed of gantry frame,
main girder, legs (two sets), slide sill, lifting mechanism,
travelling mechanism, and electric box. The leg height of this
single girder semi-gantry crane can be different according to the
engineering needs on the construction field.
Technical parameters of Semi Single girder gantry crane:
| Capacity t | Span m | Lifting height m | Lifting speed m/min | Trolley speed m/min | Crane speed m/min | Working class | Track |
| 3 | 12 | 6~9 | 8, 8/0.8 | 20 | 20 | A3-A5 | P34 P38 |
| 16 |
| 20 |
| 24 |
| 5 | 12 | 6~9 | 8, 8/0.8 | 20 | 20 | A3-A5 | P24 P38 |
| 16 |
| 20 |
| 24 |
| 30 | 9 |
| 10 | 12 | 6~9 | 7, 7/0.7 | 20 | 20 | A3-A5 | P38 P43 |
| 16 |
| 20 |
| 24 |
| 30 | 9 |
| 16 | 12 | 6~9 | 3.5, 3.5/0.35 | 20 | 20 | A3-A5 | P38 P43 |
| 16 |
| 20 |
| 24 |
| 30 | 9 |
Specidications of Semi single girder gantry crane
1. Lifting capacity: 5-50tons
2. Lifting height: 3-30m or customized
3. Span: 3-35m
4. Lifting mechanism: hoist or trolley or winch
5. Working class: A3-A5
6. Control way: pendant control, remote control, cabin control
7. Working temperature: -20 ℃ to 40 ℃
Advantages of Semi single girder gantry crane:
1. Compact structure, good rigidity.
2. Favorable performance.
3. Smooth starting and stopping.
4. Safe and reliable traveling, strong ability of lateral load
proof.
5. Low noise, no pollution.
6. Flexible installation and operation, convenient maintenance.
7. Electricity saves.
8. Excellent exchange ability for parts and components.
9. Less investment.
Semi single girder gantry crane main parts
Electric Hoist :
Model CD1,MD1 wire rope electric hoist is a small-sized lifting
equipment, which can be mounted on single beam, bridge, gantry and
arm cranes. With slight modification, It can also be used as a
winch. It is widely used in factories,mines,harbours,warehouse.
Main Beam :
Main beam will have sandblast derusting and painted with zinc rich
epoxy primer.
Main beam is cut by plasma numerical control cutting machine.
The butt weld of tension flange shall undergo ultrasonic or x-ray
flaw detection as specified.
Outrigger :
Consist of rigid outrigger and flexible outrigger, all connection
points are connected by high -tension bolt.
The ladder is used by operator to enter into cab or arriving at
winch.
When the span is beyond 30m, there needs a flexible leg to reduce
the lateralthrust of the trolley to the rail when the girder lifts
materials.
Ground End Beam :
End beam will have sandblast derusting and painted with zinc rich
epoxy primer.
The wheels of end beam are produced in special vacuum casting
workshop which make wheels more elastic and outer surface
hard-wearing and durable.
Packing and shipping
